Adjustable Shaper Fence System
An easy way to machine precision-sized narrow strips … and always perfectly parallel edges!
 

  • Fence goes on the left side of the shaper
  • Designed to size strips to the right width for backsplashes, aprons, windowsills, drop front edges, etc.
  • The fence clamps to a tube in the front (like your table saw fence) and in the back to a piece of angle iron.
  • Measure indicator on fence provides accurate, precise sizing
  • Maximum strip width is 11".

    Components are available individually so you can buy exactly what you need. For the complete package, see the light blue box below.
     

Shaper Insert Cutter
Straight cuts material up to 1" thick.
Available in two sizes.		 Adjustable Shaper Fence
Shaper Fences are custom made to fit your own Shaper Machine specifications.
#91152 $429.00 1" Spindle

#91138

$629.00

    
#91153 $429.00 11⁄4" Spindle
 
Shapers 5 HP, 7000 RPM PowerMatic Shapers will give years of service. Table size is 30" x 40". Power Feeders Maggi Steff Power Feeders (4 Roll, 4 Speed) available in either Single or 3 Phase.
#91501 $3,290.00 Single Phase   #91131 $1,449.00 Single Phase
#91503 $3,290.00 3 Phase   #91133 $1,379.00 3 Phase
#Labor $ 200.00 Shaper Set-Up   #91135 $ 149.00 Power Feeder Wheel Kit*

Insert Cutter Replacements
(inserts are reversible)
#43880 $79.00  11⁄8" inserts (box of 10)
Table Extensions
Extends the Shaper 6' on each side.
Shaper Cutter

#91505

$259.00

  
Straight cuts and puts ¼" profile on materials up to ½" thick. Great for spills.  
#91162 $349.00 1¼" Spindle

One of our customers writes…
“This system produces straight, square and nicely machined strips, which speeds production and helps to eliminate ugly seams. It’s another great Pinske ‘guy toy’.”
                —Alan Colquhoun (Turlock, CA)
 
Complete Adjustable Fence Shaper Package

Single Phase

 #91610     $5,710.00

3 Phase

 #91600  $5,640.00

Includes everything you need!

  • 5HP Shaper (1 or 3 phase)
  • Power Feeder (1 or 3 phase)
  • Table Extensions
  • Adjustable Shaper Fence
  • Shaper Insert Cutter (#91153)
  • Shaper Inserts (box of 10)
  • Shaper Setup ($200 value)

 
Components of the Shaper System:

  Shaper
  Feeder
  Fence
  Table  Extension

  Shaper Insert Cutter
  not visible

 

A TIP FROM TOM
The shaper should run at 7000 rpm.

119 Main St., P.O. Box 68
Plato, MN 55370 U.S.A.
e-mail: webinfo@pinske-edge.com
800-T-PINSKE (800-874-6753)
phone: 320-238-2196 fax: 320-238-2385
©2005  The Pinske Edge