Save time when building coved
backsplashes! The Cove Backsplash Jig works perfectly with our 12'
Stand … and the Edge Buildup Air Clamp makes the job easy and fast!
ABOVE: 12" Stand with Cove Jig. At right, another
12' Stand is
shown with the 12' Edge Build-up Clamp in use.
(Note: The 3" Spring
&Wood Clamps pictured are available here.)
A TIP FROM TOM This stand will accommodate both your Cove Jig and
your Edge Buildup Air Clamp at the same time.
A one step process for assembling
a backsplash! Save time and add profit to any fabrication business.
Our Backsplash Jig lets you clamp the coving stick and splash. They go
together quickly and automatically align.
• Our cove jig features a special spring clamp attached to the
bottom of the jig to hold the 1⁄2" x 15⁄16" cove stick to the
milled
out dado on the jig (the 12' Jig has twelve clamps).
• The jig’s length lets you set up several splashes at once.
• Since every piece is perfectly square, you have less trouble
routing the cove radius and save time sanding.
Work smart! This versatile stand has multiple uses, and makes life
easier around the shop.
• The Cove Jig Stand is an easy and affordable way to store and
use your Cove Backsplash Jig (at left).
• Place your Edge Buildup Air Clamp (at bottom) in the center of
the stand, and you’ve got room on both sides for sanding, cleaning
and applying glue to your strips.
• Features a 12' rail on each side to prepare your cove pieces
prior to gluing and also provides for clamp storage.
• Wheel casters allow for movement around your shop.
12'
Edge Buildup Air Clamp
Save time and effort—no more hand clamping. Simply connect to an air
supply and glue your edge buildup evenly and quickly. Eliminates any
chance of the glue line showing.
12' Edge Buildup Air Clamp
Do not exceed 80 psi #50144 $875.00
• 12' Cove Backsplash
Jig
• 12' Stand
• Coving Router and
Bit
(#91146)
• Extra bit (#43697)
• Rabbet Base with
fence
(#820)
• Rabbet Insert Bit
(#43693)
