Quad Master Sander

Quad Master Sander - Save Sanding Time.......Get Better Results!

This 15" random orbital sander features four 6-inch disks.

-  Works on almost any horizontal surface
-  Hooks up to any shop vacuum for dry sanding (no vacuum needed for wet sanding)
-  The dry sanding pads have venting channels that quickly channel the dust to the vacuum chamber on the shroud.
-  The connector to the dust extractor is specially angled to provide a natural flow, increasing efficiency and providing better dust control.
-  There are only three moving parts in the lower assembly, so it's quieter and has little vibrations.  It's also easy to replace the man bearing if necessary.
-  All parts are made in the USA and are in stock at The Pinske Edge.
-  The Quad Master Sander comes with one 15" pad that uses four standard 6" discs; choose either the 15" Hook It or 15" Hydro Pad.

Specifications:

Random Orbit Stroke - 3/4"
Motor - 1 HP, 2650 RPM

Voltage - 110V or (220V upon request - electrical can easily be changed from 110 to 220 - ask for easy direction)
Height - 15-1/2"
Weight - 41.25 lbs.


A REAL LIFE COMPARISON OF SANDING TIMES

We decided to compare the Quad Master Sander with a 6-inch sander to see how much time we could save.  We worked on a 40' square countertop and sanded it to a final matte finish. 

Using a 6" Sander, this finishing job took three hours.  With the Quad Master Sander, total time was reduced to just 27 minutes......six times faster than the 6" sander!  Plus the countertop sanded by the Quad Mastter had a more consistent, professional-looking surface.  The job was easier because we didn't have to fight the vibrations of the 6" sander.  Quicker, Easier, Better!

Read what some of our customers are saying.......In regards to the Quad Master Sander - in a word:  Grrrrrreat!  Easy to use, cuts sanding time way down and turns out a better product!